zoom

Chuck Inserts

Email

A variety of inserts have been made that will adapt Vicmarc Chucks to most lathes on the market.

 

All left hand, left hand/right hand, Geiger, M30x3.5, M33x3.5 and 1 1/4"x8 inserts come with a set screw locking facility to prevent the insert unscrewing itself from the Chuck whilst turning outboard.

 

Note: When mounting insert onto the Chuck, ensure that the set screw is not protruding past the insert face. Tighten the insert against the chuck face then tighten the set screw.



Below is a list of all available inserts



           Chuck Insert

 VM90/100 Insert  Part No.            VM120/150 Insert  Part No.
 Blank 5/8" Through Hole  V00532  1 1/2" x 6  V00560
 1 1/2" x 6  V00500   1 1/2" x 6 GEIGER  V00561
 1 1/2 x 6 GEIGER  V00501  1 1/2" x 6 L/R  V00562
 1 1/2" x 6 L/R  V00502  1 1/2" x 6 LH  V00563
 1 1/4" x 7  V00503  1 1/2" x 8  V00564
 1 1/4" x 8  V00504  1 1/2" x 10  V00565
 1 1/8" x 7  V00505  1 1/2" x 12  V00566
 1 1/8" x 7 LH  V00506  1 1/4" x 7  V00567
 1 1/8" x 8  V00507  1 1/4" x 8  V00568
 1 1/8" x 12  V00508  1 1/4" x 8 L/R  V00569
 1 1/8" x 12 MYFORD  V00509  1 1/4" x 8 LH  V00570
 1 3/8" x 6  V00510  1 1/4" x 9  V00571
 1 3/8" x 6 L/R  V00511  1 1/4" x 10  V00572
 1" x 8  V00512  1 1/4" x 12   V00573
 1" x 8 L/R  V00513  1 1/8" x 7  V00574
 1" x 8 LH  V00514  1 1/8" x 8  V00575
 1" x 10  V00515  1 1/8" x 8 LH  V00576
 1" x 10 L/R  V00516  1 1/8" x 12  V00577
 1" x 10 LH  V00517  1 1/8" x 12 MYFORD  V00578
 1" x 12  V00518  1 3/8" x 6  V00579
 1" x 12 LH  V00519  1 3/8" x 8 L/R  V00580
 1" x 14  V00520  1" x 8  V00581
 3/4" x 10  V00521  1" x 8 L/R  V00582
 3/4" x 14 BSP  V00522  1" x 8 LH  V00583
 3/4" x 16  V00523  1" x 10  V00584
 3/4" x 16 LH  V00524  1" x 10 L/R  V00585
 7/8" x 9  V00525  1" x 10 LH  V00586
 7/8" x 11  V00526  1" x 12  V00587
 7/8" x 12  V00527  1" x 12 LH  V00588
 7/8" x 12 LH  V00528  3/4" x 10  V00589
 7/8" x 14  V00529  3/4" x 14 BSP  V00590
 7/8" x 16  V00530  3/4" x 16  V00591
 Blank  V00531  7/8" x 8  V00592
 M14 x 2  V00533  7/8" x 11  V00593
 M18 ELU  V00534  7/8" x 12  V00594
 M18 x 2.5  V00535  7/8" x 14  V00595
 M20 x 1.5  V00536  7/8" x 14 LH  V00596
 M20 x 2  V00537  Blank 5/8" Through Hole  V00597
 M20 x 2.5  V00538  Blank  V00598
 M24 x 2  V00539  M18 ELU  V00599
 M24 x 3  V00540  M18 x 2.5  V00600
 M25 x 2  V00541  M20 x 1.5  V00601
 M25 x 2 LH  V00542  M24 x 2  V00602
 M30 L/R  V00543  M24 x 3  V00603
 M30 LH  V00544  M25 x 2  V00604
 M30 LUREM  V00545  M30 L/R  V00605
 M30 x 1.5  V00546  M30 LH  V00606
 M30 x 2  V00547  M30 x 1.5  V00607
 M30 x 3.5  V00548  M30 x 3.5  V00608
 M33 HAFCO  V00549  M33 Hafco  V00609
 M33 LH  V00550  M33 L/R  V00610
 M33 x 3.5  V00551  M33 LH  V00611
 M33 x 3.5  V00612


L/R - Left hand right hand thread
LH - Left hand thread

BSP - British standard pipe thread
ELU, GEIGER, HAFCO, LUREM, MYFORD - Lathe brands

VICMARC Machinery.

52 Grice St

Clontarf, QLD 4020

Australia

(07) 3284 3103 (in Australia)

+61 7 3284 3103 (Overseas)

 

Trading Hours: 

Monday: 6am - 3pm

Tuesday: 6am - 3pm

Wednesday: 6am - 3pm

Thursday: 6am - 3pm

Friday: 6am - 1pm

Saturday: Closed

Sunday: Closed

About Us

Connect