zoom

Eccentric Chuck #3

Email

The Eccentric Chuck #3 is designed and manufactured by Vicmarc Machinery and it expands the possibilities for off centre turning.

The main feature of the chuck is its infintely variable axis setting capacity.  With the range of 0 to 30mm  each setting gives a different turning axis.  In addition to this the rotating cup chuck allows you to create an even wider variety of shapes, depending on the chosen axis.  The optional ball chuck allows the workpiece to be swivelled up to 15 degrees off the z-axis for even more flexible turning (see diagram). This Chuck is designed with 3 moveable counter weights, located neatly in the main body of the Chuck. These can be undone and moved to balance the unit and workpiece when turning. See below images.

Being able to turn on a variety of centres without having to remove the workpiece from the chuck enables the creative turner to make very personal and original multi centered pieces.

Manufactured from K1045 (medium tensile steel - 45 tonne) the chucks have a higher durability ensuring a longer life and a very high quality finish.  Vicmarc chucks are guaranteed for 12 months and a large variety of accessories are available to suit them. 

 

Chuck thread sizes available:  Standard Chuck Includes:

M33 x 3.5 - V00295-2 (direct thread)
1 1/4 x 8  - V00295-3 (direct thread)
M45 x 2    - V00295-5 (insert type)

Please note: for insert type chuck, an appropriate insert to fit your lathe is required.  Inserts available for most threads.  

Click here for the list of inserts.

1 - Tommy bar 9.5mm (M45 x 2 only)
1 - 5mm Allen T-Bar
1 - 4mm Allen T-Bar
1 - 4mm Allen L-Bar

1 - #3 Gauge
1 - 10mm Spanner
1 - 40mm Cup Chuck
1 - Owners Manual 

Please note: M33 and 1 1/4 x 8 direct thread chuck requires a 41mm spanner to undo it from the lathe spindle (same spanner that comes with all Vicmarc Lathes). If a spanner is required the Part No. is V01035

 

Below shows all available accessories for the Eccentric Chuck #3:



There are also optional weights exclusively for the Eccentric Chuck #3. These weights include 2 x individual weights, 2 x M8 x 20 screw and 2 x M8 washers. Part No. V01230

 

 

Example of what this chuck can do

 


 

VICMARC Machinery.

52 Grice St

Clontarf, QLD 4020

Australia

(07) 3284 3103 (in Australia)

+61 7 3284 3103 (Overseas)

 

Trading Hours: 

Monday: 6am - 3pm

Tuesday: 6am - 3pm

Wednesday: 6am - 3pm

Thursday: 6am - 3pm

Friday: 6am - 2pm

Saturday: Closed

Sunday: Closed

About Us

Connect