zoom

The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internally or externally, with 8 unique soft plastic stoppers which are mounted on the face of the Jaws. 


The size of the jaw indicates the maximum diameter of the bowl that can be mounted on the jaw, for example a 220mm Bowl Jaw will hold a 220mm Bowl and so on.

220mm Bowl Jaw 285mm Bowl Jaw 385mm Bowl Jaw

Part No. V00639

Part No. V00640 

Part No. V00641 

Module

Bowl Jaw Clamp Set - Part No. - V00120

The Bowl Jaw Clamp Set is to be used in conjunction with the existing Bowl Jaw Grips and it allows for off centre turning as illustrated above. The Clamp Set includes two (2) clamp arms and all the adjusting screws necessary. This set suits all Bowl Jaw sizes (Bowl Jaws sold separately).

 

Bowl Jaw Extension Bush Set - Part No. - V00121

The Bowl Jaw Extension Bush Set is to be used in conjunction with the existing Bowl Jaw Grips.  It allows for an extended pickup distance as illustrated above.  The Extension Set includes eight (8) 15mm Extension Bushes, eight (8) 35mm Extensions Bushes and all screws necessary.  This set allows an extension of 15mm, 35mm and 50mm (15 & 35mm together) from the face of the jaw.  The Bowl Jaw Extension Bush Set will suit all Bowl Jaw sizes (Bowl Jaws sold separately).

 

Bowl Jaw V-Grip Extension Set - Part No. - V00122

The Bowl Jaw V-Grip Extension Set is to be used in conjunction with the existing Bowl Jaws and it allows for an extended pickup distance as illustrated above.  They are used to re-chuck bowls that don’t have a flat front allowing you to finish the base of the bowl.  The Bowl Jaw V-Grip Extension Set includes eight (8) 15mm Extension Bushes, eight (8) 35mm Extension Bushes, eight (8) PVC V-Grips and all screws necessary.  This set allows an extended pickup of 25mm, 45mm and 60mm from the face of the jaw and is made to suit all Bowl Jaw sizes (Bowl Jaws sold separately).

 

 

Allen Key, T-Bar M08 Long Length

The long length Allen key can be used as an aid when using the Bowl Jaws. The long length enables you to tighten and loosen without having to reposition the allen key as done with the shorter Chuck Allen key. This new long length Allen key clears the top of the Bowl Jaws, allowing you to rotate it without hitting the Jaws.

Part No. P00029

The below video demonstrates what you can do with this product:

 

 

VICMARC Machinery.

52 Grice St

Clontarf, QLD 4020

Australia

(07) 3284 3103 (in Australia)

+61 7 3284 3103 (Overseas)

 

Trading Hours: 

Monday: 6am - 3pm

Tuesday: 6am - 3pm

Wednesday: 6am - 3pm

Thursday: 6am - 3pm

Friday: 6am - 1pm

Saturday: Closed

Sunday: Closed

About Us

Connect