zoom
d-tail 223mm6 d-tail 1983 d-tail-173mm d-tail-148mm d-tail 128mm 105 dove VM120 85mm Dove

Dovetail Jaws

Email

Dovetail Jaws have been designed for mounting bowls by expanding into a recess or clamping onto a spigot.

The sizes indicated on the drawing show the Jaw measurments at a perfect circle.  VM120 and VM150 chucks provide approx. 48mm of expansion beyond these specified sizes shown with the exception of the 85mm and 105mm Dovetails (see below). All Dovetail Jaws have an internal dovetail angle of 13 degrees for clamping and an external dovetail angle of 13 degrees for expanding. 

 

Dovetail Jaw 85mm

Part No. V00675

Note* these Jaws measure 85mm in diameter (on the outside dovetail) when they are at a perfect circle.  When the Jaws are fully closed they measure 82mm and will open to a maximum of 114mm in diameter. The back section of these Jaws have been specially machined to avoid the screw holes passing through the dovetail section. This has reduced the expansion range. However, having an uninterrupted dovetail section allows you to clamp the workpiece with maximum surface area preventing marking of the timber. 

               

Dovetail Jaw 105mm

Part No. V00676

Note*  these Jaws measure 105mm in diameter (on the outside dovetail) when they are at a perfect circle.  When the Jaws are fully closed they measure 102mm and will open to a maximum of 119mm in diameter. The back section of these Jaws have been specially machined to avoid the screw holes passing through the dovetail section. This has reduced the expansion range. However, having an uninterrupted dovetail section allows you to clamp the workpiece with maximum surface area preventing marking of the timber. 

            

Dovetail Jaw 128mm


Part No. V00677

            

Dovetail Jaw 148mm

Part No. V00678

            

Dovetail Jaw 173mm

 No. V00679

            

Dovetail 198mm Jaw

No. V00680

            

Dovetail Jaw 223mm

Part No. V00682

 

                

Watch below video to take a closer look at our range of VM120/150 Dovetail Jaws

VICMARC Machinery.

52 Grice St

Clontarf, QLD 4020

Australia

(07) 3284 3103 (in Australia)

+61 7 3284 3103 (Overseas)

 

Trading Hours: 

Monday: 5am - 3pm

Tuesday: 5am - 3pm

Wednesday: 5am - 3pm

Thursday: 5am - 3pm

Friday: Closed

Saturday: Closed

Sunday: Closed

About Us

Connect