zoom

VL300 SHORT SM EVS 2.2kW

Email

The VL300 Short Stand Mount EVS (Electronic Variable Speed) lathe is the big brother to the VL300 SM EVS 1.5kW lathe. It comes with a powerful 2.2kW motor (3HP).

 

The electronic variable speed drive gives up to 200% torque on low rpm. The three-step pulleys provide 3 ratios 1:1 for small to medium size work; 1:1.5 for medium to large work; and 1:3 for large work. The lathe is fitted with a remote magnetic switch box (including reverse), that can be positioned anywhere on the lathe for easy access.

 

The cast iron lathe is mounted on a 4mm thick steel plate stand, which has been designed with a 700mm wide footprint for stability and rigidity.

 

All VL300 lathe models accept an extension bed at either end of the bed.  A 500mm or 1000mm bolt on extension bed is available and multiple extensions can be added on.

Note: with 1000mm extension bed you will require an extension bed leg.

The VL300 SM EVS has been upgraded and now includes these following new features!

    

Precision machined face on both ends of the bed for bolt on extension bed or swing away tailstock support.

Digital speed readout located below the headstock that displays the actual spindle RPM.

Hindged headstock door for ease of use and an ergonomic Toolrest.



Comes standard with Remote magnetic switch box 

Maximum spindle RPM at each Pulley step

 

This model lathe can also be fitted with a mushroom twist stop bottom and additional limit switches on the headstock and motor doors making it comply to regulations for lathes in schools;  Part No. P01115

  VL300S SM Specifications
300mm Centre Height
600mm Swing over bed
500mm Distance between centres
1130mm Work Height (Stand Bottom to spindle centre)
24 Indexing holes
No. 2 MT Headstock & Tailstock spindle
Taper Roller  Spindle Bearings
3 Speeds EVS 10 - 3000rpm
30mm Toolrest Post Diameter
15mm Hole Through Headstock Spindle
10.5mm Hole Through Tailstock Spindle
75mm Quill Travel
235kg Net Weight
1060x680x1245 Length x Width x Height (mm)
  Standard Accessories
1 Faceplate 150mm
1 Heavy Duty Live Centre
1 Tool Rests 300mm
1 10mm Knockout Bar
1 Drive Dog
1 Spanner
1 Vicmarc Hat
1 Owner's Manual
Available In
Thread Part No. Power Plug
M30 x 3.5 V00770-1AU Australia
M33 x 3.5  V00770-2EU Europe
M33 x 3.5 V00770-2UK United Kingdom
M33 x 3.5 V00770-2US United States
1 1/4" x 8 V00770-3US United States

 

 

VICMARC Machinery.

52 Grice St

Clontarf, QLD 4020

Australia

(07) 3284 3103 (in Australia)

+61 7 3284 3103 (Overseas)

 

Trading Hours: 

Monday: 6am - 3pm

Tuesday: 6am - 3pm

Wednesday: 6am - 3pm

Thursday: 6am - 3pm

Friday: 6am - 1pm

Saturday: Closed

Sunday: Closed

About Us

Connect